This new subsystem is somewhat replacing the IDE disk code we had with a
new flexible design.
StorageDevice is a generic class that represent a generic storage
device. It is meant that specific storage hardware will override the
interface. StorageController is a generic class that represent
a storage controller that can be found in a machine.
The IDEController class governs two IDEChannels. An IDEChannel is
responsible to manage the master & slave devices of the channel,
therefore an IDEChannel is an IRQHandler.
IRQ 7 and 15 on the PIC architecture are used for spurious interrupts.
IRQ 7 could also be used for LPT connection, and IRQ 15 can be used for
the secondary IDE channel. Therefore, we need to allow to install a
real IRQ handler and check if a real IRQ was asserted. If so, we handle
them in the usual way.
A note on this fix - unregistering or registering a new IRQ handler
after we already registered one in the spurious interrupt handler is
not supported yet.
Such device is not an IRQHandler by itself, but actually a controller of
many IRQ or MSI devices. The purpose of this class is to manage multiple
sources of interrupts.
For example, a generic ISA IDE controller controls 2 IRQ sources - 14
and 15. So, when we initialize the IDE controller, it will initialize
two IDE channels (also known as PATAChannels) to utilize IRQ 14 and 15,
respectively. NVMe with MSI-X support can theoretically handle up to
2048 interrupts.
Problem:
- `(void)` simply casts the expression to void. This is understood to
indicate that it is ignored, but this is really a compiler trick to
get the compiler to not generate a warning.
Solution:
- Use the `[[maybe_unused]]` attribute to indicate the value is unused.
Note:
- Functions taking a `(void)` argument list have also been changed to
`()` because this is not needed and shows up in the same grep
command.
Switch on the new credentials before loading the new executable into
memory. This ensures that attempts to ptrace() the program from an
unprivileged process will fail.
This covers one bug that was exploited in the 2020 HXP CTF:
https://hxp.io/blog/79/hxp-CTF-2020-wisdom2/
Thanks to yyyyyyy for finding the bug! :^)
The overrides of this function don't need to know how the original
packet was stored, so let's just give them a ReadonlyBytes view of
the raw packet data.
We need to stop assuming that KBuffer allocation always succeeds.
This patch adds the following API:
- static OwnPtr<KBuffer> KBuffer::create_with_size(size_t);
All KBuffer clients should move towards using this (and handling any
failures with grace.)
ACPI 2 declared the third revision of FADT, that should have
IAPC_BOOT_ARCH flags in it, also to indicate if i8042 is present.
Q35 machine reports that it has FADT with revision 3, but the code
in QEMU simply ignores these flags and put zero on them no matter
the revision of FADT.
We need to account for how many shared lock instances the current
thread owns, so that we can properly release such references when
yielding execution.
We also need to release the process lock when donating.
LexicalPath is a big and heavy class that's really meant as a helper
for extracting parts of a path, not for storage or passing around.
Instead, pass paths around as strings and use LexicalPath locally
as needed.
When a process crashes, we generate a coredump file and write it in
/tmp/coredumps/.
The coredump file is an ELF file of type ET_CORE.
It contains a segment for every userspace memory region of the process,
and an additional PT_NOTE segment that contains the registers state for
each thread, and a additional data about memory regions
(e.g their name).
This adds an allocate_tls syscall through which a userspace process
can request the allocation of a TLS region with a given size.
This will be used by the dynamic loader to allocate TLS for the main
executable & its libraries.
When the main executable needs an interpreter, we load the requested
interpreter program, and pass to it an open file decsriptor to the main
executable via the auxiliary vector.
Note that we do not allocate a TLS region for the interpreter.
This fixes an issue where TCP sockets could get into the Established
state too quickly and fail to unblock a subsequent sys$select() call.
This makes websites load *significantly* faster. :^)
Since the process lock is using the Lock class, re-locking the process
lock may cause another call to Thread::block. This caused some problems
with multiple blockers attempting to be used at the same time. To solve
this problem, remember if the process lock was held, and if it was then
relock after we're done with the blockers, just before returning.
This prevents zombies created by multi-threaded applications and brings
our model back to closer to what other OSs do.
This also means that SIGSTOP needs to halt all threads, and SIGCONT needs
to resume those threads.
This is necessary because if a process changes the state to Stopped
or resumes from that state, a wait entry is created in the parent
process. So, if a child process does this before disown is called,
we need to clear those entries to avoid leaking references/zombies
that won't be cleaned up until the former parent exits.
This also should solve an even more unlikely corner case where another
thread is waiting on a pid that is being disowned by another thread.
Fix some problems with join blocks where the joining thread block
condition was added twice, which lead to a crash when trying to
unblock that condition a second time.
Deferred block condition evaluation by File objects were also not
properly keeping the File object alive, which lead to some random
crashes and corruption problems.
Other problems were caused by the fact that the Queued state didn't
handle signals/interruptions consistently. To solve these issues we
remove this state entirely, along with Thread::wait_on and change
the WaitQueue into a BlockCondition instead.
Also, deliver signals even if there isn't going to be a context switch
to another thread.
Fixes#4336 and #4330
Instead of flushing the TLB on the current processor first and then
notifying the other processors to do the same, notify the others
first, and while waiting on the others flush our own.
Move counting interrupts out of the handle_interrupt method so that
it is done in all cases without the interrupt handler having to
implement it explicitly.
Also make the counter an atomic value as e.g. the LocalAPIC interrupts
may be triggered on multiple processors simultaneously.
Fixes#4297
This allows us to use blocking timeouts with either monotonic or
real time for all blockers. Which means that clock_nanosleep()
now also supports CLOCK_REALTIME.
Also, switch alarm() to use CLOCK_REALTIME as per specification.
